How to Descale Breville Coffee Maker

How to Descale Breville Coffee Maker

Last updated Jan 12, 2022

Posted in Home Appliances

How to descale a Breville coffee maker?

This is the question that many people are asking themselves.

The good news is, there are some straightforward steps you can follow to descale your coffee machine!

What does descale mean on Breville coffee maker?

When you descale your coffee maker, it means that you are removing the calcification from its water-flow system.

Scale buildup is a natural result of hard water and some types of machine use.

This can lead to slow or clogged lines for hot water, leading to poor tasting drinks and occasionally damaging the machinery.

Therefore, descaling is critical in maintaining a properly working item over time!

Descaling is the process of removing scale (mineral deposits) from your machine.

Scale that builds upon a coffee maker can affect its performance, making sub-standard beverages.

The more minerals you have in the water, the faster it will build up inside the machine.

For example, Coffee machines with heating elements are at risk for mineral buildup because they use hot water over time which causes scaling to occur, even if you don't put anything besides plain tap water into your machine!

Hard or acidic waters – high levels of these minerals make them difficult to dissolve, so calcium carbonate 'scale' and limescale tend to form quickly inside appliances such as kettles or irons, especially if they have a heating element.

If you were to leave your machine in its descaling mode for an extended period, it could end up damaging the machine and affect the taste of future beverages.

If you're not sure when was the last time you descaled your coffee maker, or if you don't know what 'descaling' is all about, then here are some signs that your brewer may need cleaning:

  • Your drinks aren't lasting like they used to.

  • A buildup on top of parts inside.

  • They look dirty.

  • You can see scale starting to form at the bottom/sides of the machine.

The good news is that descaling your coffee maker doesn't have to be complicated or a big deal.

You can do it in just a few minutes and when your know-how!

How do you know if your machine needs descaling?

There are a few ways to know when your coffee machine needs descaling.

You could start by running the recommended amount of water through each cycle without using any ground beans to see if it's producing enough steam for you.

If not, the heating element might need cleaning or replacing, which would require descaling.

Another way is that there may be calcium buildup on the internal parts, which increases noise during operation, too much pressure inside the unit, causing leaks where valves meet with gaskets and corrosion around metal surfaces such as those found at valve openings or boilerplate connections.

How often should you be doing this?

Several factors can influence how frequently your machine needs descaling.

The more often the device is used, the faster descaling will be required.

Descaling is also crucial for good quality coffee - if there are many mineral deposits leftover from the water, it will affect the taste of your coffee.

Descale every six months or so, but this depends on how much you're using it!

Some automatic drip coffee makers need to change their water filter every 100 uses.

It means you'll only need to run the descaling solution through twice per year, meaning it won't take up too much of your time!

Many people find out they don't need to do anything for six months and, after finishing their first cycle, repeat until the next checkup.

What are the benefits of descaling?

The main benefit of descaling your machine will ensure that it runs smoothly and efficiently for as long as possible!

It's also essential because a buildup inside the device over time could lead to health issues if you're not careful.

Descaling your Breville coffee maker with vinegar

Descaling a Breville coffee maker is not as intimidating as it sounds, and you do not need to worry about damaging the machine.

There are a few simple household items that you can use as a descaler.

White vinegar is the most common replacement for descaling solution and effectively cleans out calcified water deposits.

First, fill the water tank with half white vinegar and half cold tap water.

Set your machine to brew a strong cup of the solution through the coffee maker's "normal" cycle (no need for any special grind or setting).

When it gets done brewing, run two more processes using just plain water afterward to make sure all those bubbles are entirely gone from inside your machine.

That should help take care of most minor scale issues on its own!

Suppose there are any mineral deposits, in particular.

If that won't budge even after repeated attempts at descaling, try boiling some fresh lemon juice instead – make sure you never use citric acid tablets containing harmful chemicals like phosphoric acid.

Descaling by running fresh water through the method

The second method involves simply running fresh water through the machine for several hours (or until it runs clear) then repeating this step.

This process will take much longer than using vinegar & citric acid, but both methods effectively descaling Breville Coffee Makers.

Can you use lemon juice to descale Breville coffee maker?

Yes, using a lemon juice and water mixture is also an effective way to descale your Breville coffee machine.

Fill half carafe with each liquid before turning on the appliance and flushing all other parts at least twice, followed by a regular rinsing cycle.

Make sure not to mix both drinks before inserting them into the water tank!

If you have hard water in your home area, this method may be more suitable for you than vinegar, which can corrode internal components if used too frequently or incorrectly (you should only use vinegar once per month).

Can you use CLR or Coca-Cola to descale the Breville coffee maker?

No, do not try using CLR or coke for this job!

These products are highly acidic, which will damage your machine if used regularly.

How do you put your Breville in descale mode?

The first thing that you need to do is put your coffee machine into descale mode.

To do this, find the 'descaling' button on your Breville and push it in downwards with a pen or pencil (or similar).

This will then switch on the 'descale indicator light.'

How long does it take for your Breville's descale light to go out?

Once you have run your Breville through its descaling cycle, wait until the 'descale indicator light' has turned off on its own accord before switching on again.

This usually takes around 30 minutes and means that all buildup has been removed from inside your unit!

If neither of these things happens, then there may still be some residue left, in which case you need to run your Breville through the descaling cycle again.

What liquids can damage your Breville coffee maker's internal components?

Do not use acidic substances such as cola soft drinks to clean out any buildup inside the unit!

It may look like a good idea to do this, but you will be doing more harm than good.

You should also not use any cleaning products containing bleach as these can damage the parts of your Breville coffee machine that come into contact with water (such as the boiler).

Why does the descale light stay on?

One of the most common reasons people describe their coffee maker is that they notice a red light that stays on.

This symptom refers to the "descale" light, and it can be annoying and confusing!

You'll need to run some descaling solution through your machine to fix it when this happens.

Is there anything you need to know before starting?

Although this process is safe, we advise wearing gloves when handling white vinegar or any other potentially hazardous chemicals so that you don't get them on your skin without realizing it!

Also, make sure you unplug the brewer from power first before doing anything else!

Final thoughts

Descaling a Breville coffee maker is as easy as running vinegar and water through the machine.

To do this, make sure to use filtered or bottled water and not tap water because it will leave behind minerals that may damage your device.

Then, fill up one side of the reservoir with vinegar and put some freshly ground coffee beans on the other side for flavor (don't forget to turn off the grinder).

Next, turn on your brewer like normal by pressing the brew-pause button for 4-5 minutes before turning back off again.

The descaled Breville coffeemaker should now be ready to go!

Related Posts in Home Appliances

Best Solar Generator for Refrigerator